1,200 Sq Ft Tile Roof Cost (2026)
A 1,200 sq ft tile roof runs about $8,400 to $18,000 installed in Florida (2026), or $3,600 to $7,200 for materials only.
These tile figures are an industry-reference estimate. Florida-specific pricing for this material is being sourced and will replace the placeholder ranges.
$700 to $1,500 per roofing square. Industry-reference estimate (Homewyse and RoofingCalc typical); Florida-specific pricing pending.
| Materials | $3,600 to $7,200 Tile and accessories for about 12 squares. |
| Labor | $2,980 to $6,700 Crew, install, and staging. The largest share of most jobs. |
| Tear-off and disposal | $1,250 to $2,810 Stripping the old roof and hauling it off. Rises with extra layers. |
| Permit and inspection | $580 to $1,300 Florida re-roof permit and final inspection. An approximate derived share. |
| Total installed | $8,400 to $18,000 Typical $13,200. Low, typical, and high across a normal range of roofs. |
Scaled from real Florida per-square pricing off a 30-square baseline; the permit share is an approximate derived figure. How we estimate →
What affects the cost of a 1,200 sq ft roof.
A 1,200 sq ft roof is about 12 squares, still on the smaller side for a Florida single-family home. The per-square cost is a little lower than on a 1,000 sq ft roof because the fixed costs of the job, the permit, the dumpster, and the crew's setup, now spread across two more squares, but the effect is modest at this scale. Material and labor still make up most of the bill, and both track closely with the square count once the roof is on the truck.
What changes the number most at 1,200 sq ft is the shape of the roof and how many layers come off. A simple gable with one ridge and few penetrations installs fast; a hip roof with several valleys, skylights, and a chimney takes longer and uses more flashing and underlayment. Accessibility matters too, since a tight lot or a two-story elevation slows the crew and can add a day of labor.
Florida code drives part of the cost regardless of size: permit and inspection fees, a rated underlayment, and secondary water protection in the wind zone are all included in these ranges. This estimate scales linearly from a 30-square baseline, so a 1,200 sq ft figure is close but not exact. Use it to frame your budget, then confirm with a contractor who has measured the actual roof.
A 1,200 sq ft tile roof costs about $8,400 to $18,000 installed in Florida in 2026, with a typical price near $13,200, or roughly $700 to $1,500 per roofing square. Concrete and clay tile cost more than shingles, partly because the heavier material needs adequate roof structure. These figures are an industry-reference estimate; Florida-specific tile pricing is being finalized.
A 1,200 sq ft roof is about 12 roofing squares. Roof area is larger than a home's floor area because it follows the pitch and overhangs, so a 1,200 sq ft roof does not mean a 1,200 sq ft house. Tile is priced by the square, so the roof's square footage drives the estimate.
A concrete or clay tile roof typically lasts 50 years or more in Florida, well beyond an asphalt roof on the same 1,200 sq ft home. Tile is common across Florida for its longevity and heat resistance, though the underlayment beneath it usually needs replacing sooner than the tile itself.
Florida homeowners insurance covers roof replacement when the damage is from a covered peril such as a hurricane or hail, not from age and wear. A 1,200 sq ft tile roof runs about $8,400 to $18,000, and while tile lasts a long time, carriers still weigh the age of the roof and its underlayment when pricing or writing a policy.
Price your roof.
Get a budget estimate for your exact home, then see a new roof on it.